360 Degree Round Road Stud Light Embedded Type B2--RUICHEN Road Stud Light Suppiler

360 Degree Round Road Stud Light Features:

•High shock resistance, energy-saving, environment friendly.

•Automatically starts to work when night falls or with the onset of inclement weather.

•These aluminum alloy LED Road Stud Lights are naturally charged by the sun.

•The LED lights of Road Stud Light come on automatically as soon as it starts getting dark every night.

•Cost effective, Road Stud Lights easy to install and require absolutely no wires or maintenance.

•Dramatically enhances the look of your garden/yard/driveway.

•Specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.

•Pavement marker Road Stud Light accept OEM/ODM

Embedded Type Plastic Solar Road Stud Parameters:

Material:	Anti-UV PC
Power supply:	Solar panel(monocrystalline 2.5V/0.2W)
Battery:	NI-MH 1.2V/800MAH or Lithium battery
Working model:	Blinking or Constant Charging at daytime and working automatically at night
LED:	Ultra bright LED, diameter 5mm(6pcs)
LED colors:	Yellow, White, Red, Green, Blue
Life span:	3 years
Resistance:	>20T(static)
Size:	φ11256mm (φ4.412.20″)
Visual distance:	>800M
Water poof:	IP68
Carton Size:	1pcs/box;30pcs/ctn; Weight:13.5kgs; Carton size:6034.521.5cm (1pcs/box;30pcs/ctn; Weight:29.76bs; Carton size:23.62″13.58″8.46″)

Application of Aluminum Road Stud Light B2:

♥Schools and hospitals

♥Highways

♥High traffic areas

♥Walking paths

♥Transit stations

♥Parks and campuses

♥Urban Road

Installation Method Of Embedded Road Stud Light:

Carefully mark the distance between the placement of Road Stud Lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill Φ108mm and depth will be 50mm.
Remove all debris from the installation hole.
Pour epoxy into the holes per the manufacturer’s instruction.
Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the plastic Road Stud Light shaft.
Set the lighting surface of the Road Stud Light to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft.
After curing the LED Road Stud Light for 6-8 hours, remove the installation of the isolation facility.