E-MAIL: info@rctraffic.com
TEL: +86 15238616235
Body Material: ABS
Size: 103*80*18mm (4.06″*3.15″*0.71″)
Filling: Epoxy+Quartz sand
Lens Material: PMMA
Cat Eyes Road Stud Light Features:
•Reflective Road Stud Lights water, oil, chemical, and heat resistance.
•Reflective Road Stud Light can work more than 3 years normally.
•Very high reflectivity.
•Reflective Road Stud Light easy installation with glues.
•Photometric values:exceeds 600(mcd/lux).
Cat Eyes Road Stud Light Parameters:
| Body material: | ABS |
| Filling: | Epoxy+Quartz Sand |
| Lens Material: | PMMA |
| Reflector type: | Double side/Single side |
| Quality: | ASTM D4280 & EN1463-1 standard |
| Size: | 103*80*18mm (4.06″*3.15″*0.71″) |
| Packing: | 45.5*25*22cm,100pcs/ctn (17.91″*9.84″*8.66″,100pcs/ctn ) |
| Weight: | 93g/pc; 10kg/ctn (0.21bs/pc; 22.05bs/ctn ) |
Installation Method Of Cat Eyes Road Stud Light:
1. Determine the installation location and distance, clean the road surface, and ensure that the Road Stud Lights are installed on a flat road surface.
2. Clean the bottom of the Road Stud Lights and apply the epoxy glue evenly to the back of the studs.
3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
4. Check within 2 hours of installation to ensure that all Road Stud Lights are not installed incorrectly and are not bent or deformed due to compression.
5. Remove the installation isolation facility within 6-8 hours after the installation of the Road Stud Lights.