Aluminum Road Stud Light Pavement Marker C3--RUICHEN Road Stud Light Suppiler

Introduction

Aluminum Road Stud Light Features:

•Up to 800 meters of visibility.

•Reliable all night, all-year-round performance.

•Totally sustainable harnessing free solar energy.

•Used where street lighting is either unavailable, solar stud not cost-effective, or environmentally impossible.

•Cost-effective, LED Road Stud Lights are easy to install and require absolutely no wires or maintenance.

•Solar-powered Road Stud Lights self-contained surface mounted.

•Road Stud Lights for road accept OEM/ODM

Aluminum Road Stud Light Pavement Marker C3 color — Five colors for choice: White, Amber, Red, Blue, Green

Aluminum Road Stud Light Pavement Marker Parameters:

Material:	Aluminium+ PC
Power supply:	Solar panel(monocrystalline 2.5V/0.3W)
Battery:	Lithium battery 1000mA
Working model:	Blinking or Constant Charging at daytime and working automatically at night
Life span:	5 years for lithium battery;
LED colors:	Yellow, White, Red, Green, Blue
Resistance:	>30T(static)
Size:	φ12345mm (φ4.84″1.77″)
Visual distance:	>800M
Water poof:	IP68
Carton Size:	1pcs/box; 30pcs/ctn; Weight: 30kgs; Carton size: 67.52820cm (1pcs/box; 30pcs/ctn; Weight: 66.14bs; Carton size: 26.57″11.02″7.87″)

Aluminum Road Stud Light Pavement Marker C3

Application of Aluminum LED Road Stud Lights C3:

♥Schools and hospitals

♥Highways

♥High traffic areas

♥Walking paths

♥Transit stations

♥Parks and campuses

♥Urban Road

How to install Road Stud Light Pavement Marker C3:

1.Carefully mark the distance between the placement of Road Stud Lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 125mm and depth will be 45mm.

2.Remove all debris from the installation hole.

3.Pour epoxy into the holes per the manufacturer’s instruction.

4.Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the Road Stud Light shaft.

5.Set the lighting surface of the Road Stud Light to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and Road Stud Light shaft.

After curing the LED Road Stud Light for 6-8 hours, remove the installation of the isolation facility.